MORE SEAGRID PROBLEMS

[dnavidad]

whe i tried to open View>Setup to change the spacing of my grid i get the following error in seagrid.

??? Undefined function or method 'finite' for input arguments of type 'double'.

Error in ==> guido>uilayout at 787
a = a(finite(a));

Error in ==> guido at 356
uilayout(theControls, theLayout, [1 1 18 18]/20)

Error in ==> seagrid.dosetup at 83
s = guido(SeaGrid_Setup);

Error in ==> seagrid.doevent at 187
dosetup(self)

Error in ==> psevent at 25
doevent(ps(gcbf), theEvent, theMessage);

??? Error while evaluating uimenu Callback


If i close the program and launch it again i get

>> seagrid
## setsafe: Error using ==> set
Axes must be an existing child of figure
## setsafe: Error using ==> set
Axes must be an existing child of figure
## setsafe: Error using ==> set
Axes must be an existing child of figure
## setsafe: Error using ==> set
Axes must be an existing child of figure
## setsafe: Error using ==> set
Axes must be an existing child of figure

[jivica]

in the old matlab "finite" was OK but in new version it is replaced with "isfinite"
so go into the code and find/replace "finite" with "isfinite"

Cheers,
Ivica

[dnavidad]

thanks a lot.

it is working.

[dnavidad]

hello,

i can't use since a few days ago the ncdump command in matlab.

Code: Select all

>> ncdump('roms_grd.nc')

??? Undefined function or variable "fcn".

Error in ==> ncmex at 108
[varargout{:}] = feval(fcn, varargin{:});

Error in ==> netcdf.open at 20
[theNCid, status] = ncmex('open', name(self), thePermission);

Error in ==> netcdf.netcdf at 431
result = open(result, thePermission);

Error in ==> ncdump at 58
nc = netcdf(theNetCDFFile, 'nowrite');
??? Undefined function or variable "fcn".


Also i have this problem, the rnc folder is not in the matlab tool. i wonder it is the cause of previous error, where i can find this folder?

Warning: Name is nonexistent or not a directory: D:\MATLAB_PATH\matlab_roms\rnc.
> In path at 110
In startup at 28
In matlabrc at 222

thanks

[dnavidad]

i have still the same problem, is my netcdf tools well installed

Code: Select all

> which nc_varget

D:\MATLAB_PATH\mexcdf\snctools\nc_varget.m

Code: Select all

>> tnetcdf
 ## http://crusty.er.usgs.gov/~cdenham
 ## NetCDF Toolbox For Matlab-5.
 ## Version of 30-Apr-2003 11:16:19
 
 ## TNETCDF: Using file "foo.nc"
??? Undefined function or variable "fcn".

Error in ==> ncmex at 108
   [varargout{:}] = feval(fcn, varargin{:});

Error in ==> ncitem.options at 21
   result = ncmex('setopts', theOptions);

Error in ==> tnetcdf at 54
oldOptions = options(ncitem, 0);   % Quiet mode.

Code: Select all

>> which('netcdf','-all')
D:\MATLAB_PATH\netcdf_toolbox\netcdf\@netcdf\netcdf.m  % netcdf constructor
D:\MATLAB_PATH\matlab_roms\netcdf\@netcdf\netcdf.m     % Shadowed netcdf constructor

Code: Select all

>> which('mexnc','-all')
D:\MATLAB_PATH\mexcdf\mexnc\mexnc.m

so, is it well installed?

[dnavidad]

i am trying to modify the spacing in a grid already made with setup menu. the screen when you can change the spacing doesn't work?

is that normal? should i make a new one from the beginning?

i get this error.

>
??? Error using ==> mat2str
Too many input arguments.

Error in ==> guido at 316
theControls(end+1) = uicontrol( ...

Error in ==> seagrid.dosetup at 83
s = guido(SeaGrid_Setup);

Error in ==> seagrid.doevent at 187
dosetup(self)

Error in ==> psevent at 25
doevent(ps(gcbf), theEvent, theMessage);

??? Error while evaluating uimenu Callback

[dnavidad]

Just to let know

the only tools of ROMS Matlab tool-kit that is giving problems is rnc. i wonder if i can find this folder in other location but although the path appears in the startup.m file

path(path, fullfile(my_root, 'matlab_roms', 'rnc', ''))

this folder it is not included.

Warning: Name is nonexistent or not a directory: D:\MATLAB_PATH\matlab_roms\rnc.
> In path at 110
In startup at 26
In matlabrc at 222

i just commented that line.

thanks.